Home / Arduino Make Your UNO Kit
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware
  • Arduino Make Your UNO Kit - tumbierware

Arduino Make Your UNO Kit

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Description

    • Arduino Make Your UNO Kit
    • Offers to learn the basics of electronics and coding
    • Comes with a complete set of instructions
    • Includes a USB-C serial adapter board
    • Allows you to build a synth and make your music
    • Equipped with the well-known ATmega328P processor

    The Arduino Make Your UNO Kit is the perfect kit to learn the basics of electronics and coding by assembling your own Arduino UNO. Become familiar with soldering by mounting every single component. unleash your creativity with the Audio Synth Shield. and learn how to code using your new Arduino UNO board to create amazing projects.

    The Make Your UNO Kit comes with a complete set of instructions in a dedicated content platform. This includes video material. a 3D interactive viewer for following detailed instructions. and how to program your board once it is finished.

    Note: This kit doesn't include a soldering iron or soldering tin.

    Arduino Make Your UNO Kit

    • 1x Make Your UNO PCB
    • 1x USB C Serial Adapter Board
    • 7x Resistor 1k Ohm
    • 2x Resistor 10k Ohm
    • 2x Resistor 1M Ohm
    • 1x Diode (1N4007)
    • 1x 16 MHz Crystal
    • 4x Yellow LED
    • 1x Green LED
    • 1x Push-Button
    • 1x MOSFET
    • 1x LDO (3.3 V)
    • 1x LDO (5 V)
    • 3x Ceramic Capacitor (22 pF)
    • 3x Electrolytic Capacitor (47 uF)
    • 7x Polyester Capacitor (100 nF)
    • 1x Socket for ATMega 328p
    • 2x I/O Connectors 
    • 1x Connector Header 6 pins
    • 1x Barrel Jack Connector
    • 1x ATmega 328p Microcontroller

     Arduino Audio Synth

    • 1x Audio Synth PCB 
    • 1x Resistor 100k Ohm
    • 1x Resistor 10 Ohm
    • 1x Audio Amplifier (LM386)
    • 1x Ceramic Capacitor (47 nF)
    • 1x Electrolytic Capacitor (47 uF)
    • 1x Electrolytic Capacitor (220 uF)
    • 1x Polyester Capacitor (100 nF)
    • 4x Connector Pin Header 
    • 6x Potentiometer 10k Ohm with Plastic Knob

     Spare Parts

    • 2x Electrolytic Capacitor (47 uF)
    • 2x Polyester Capacitor (100 nF)
    • 2x Ceramic Capacitor (22 pF)
    • 1x Push-Button
    • 1x Yellow LED
    • 1x Green LED

     Mechanical Parts

    • 5x Screw Nut
    • 5x Spacer 12 mm
    • 2x Screw 12 mm
    • 11x Spacer 6 mm

    Size

    • Speaker Diameter: 45 mm

    PDF Files

    • Arduino Make Your UNO Kit - Datasheet
    • Arduino Make Your UNO Kit - Schematics

    ATMega328P Processor

    • Memory: AVR CPU at up to 16 MHz | 32kB Flash | 2kB SRAM | 1kB EEPROM
    • Security: Power On Reset (POR) | Brown Out Detection (BOD)

    USB-C Serial PCB Board

    • ATMega16U2 Processor: 8-bit AVR RISC-based microcontroller
    • Memory: 16 KB ISP Flash | 512B EEPROM | 512B SRAM | debugWIRE interface for on-chip debugging and programming
    • Power: 2.7 V - 5.5 V

    Audio Synth Shield

    • Potentiometers: 5x 10kΩ - Trimmer potentiometer - User programmable | 1x 10kΩ - Trimmer potentiometer - Directly connected to the audio amplifier

    Audio

    • Amplifier (LM386): Class-AB | 4Ω Load | 0.325 W
    • Speaker (L50EJ): Impedance at 2kHz: 8Ω | Max Power 0.5 W | Output: 81 dB +-3 dB
    • Weight: 48 g
  • Customer Reviews
    No comments
BACK